It’s working now. I haven’t tested it with DIEHARDER yet, I may do it later, when I have time. But if it looks like white noise, walks likes whitenoise…
BTW, the author’s (of the paper) optimization works fine. Realy, think about it, why wouldn’t it work? It’s still rotating, that’s all matters really.
I’m going to start working on the agent simulation part of PZ.
#extension GL_EXT_gpu_shader4 : enable
//This function initializes the 512bit data according to the MD5 spec.
//Such that, the first 128 bit is the input;
//we also xor these 128 bits with the key, which can act like a seed value.
//And the rest up of the 12 32bit data blocks are filled
//according to the md5 spec, in order to pad our data to 512 bits.
//block 0-3: input xor with key
//block 4: 0x80000000. This correponds to append 1 bit to block 0-4.
//block 5-13: 0. This corresponds to appending zeros up to 448 bit.
//block 14-15: 0x0000000000000080. This correspond to the bit length of the input (128 bit), as a 64bit
//litten endian.
void setupInput(in uvec4 input, in unsigned int key, inout unsigned int data[16])
{
data[0] = input.x^key; data[1] = input.y^key; data[2] = input.z^key; data[3] = input.w^key; //xor base with key
data[4] = 0x80000000u;
data[5] = 0u; data[6] = 0u; data[7] = 0u; data[8] = 0u;
data[9]=0u; data[10]=0u; data[11]=0u; data[12]=0u; data[13]=0u;
data[14] = 0x00000000u; data[15]=0x00000080u;
}
//initialize to the 4 hexes.
uvec4 initDigest()
{
return uvec4(0x01234567u,0x89ABCDEFu,0xFEDCBA98u,0x76543210u);
}
//F compression functions
//(b & c) | ((not b) & d)
unsigned int F0_15(in uvec3 tD)
{
return (tD.x & tD.y) | ((~tD.x) & tD.z);
}
//(d & b) | ((not d) & c)
unsigned int F16_31(in uvec3 tD)
{
return (tD.z & tD.x) | ((~tD.z) & tD.y);
}
//b ^ c ^ d
unsigned int F32_47(in uvec3 tD)
{
return tD.x ^ tD.y ^ tD.z;
}
//c ^ (b | (~d))
unsigned int F48_63(in uvec3 tD)
{
return tD.y ^ (tD.x | (~tD.z));
}
//return input/(2^32) //2^32 - 1.0 + 1.0
vec4 convertToR0_R1(in uvec4 input)
{
return output;
}
uvec4 whiteNoise(in uvec4 input,in unsigned int key)
{
unsigned int data[16];
setupInput(input,key,data);
uvec4 rot0_15 = uvec4(7u,12u,17u,22u);
uvec4 rot16_31 = uvec4(5u,9u,14u,20u);
uvec4 rot32_47 = uvec4(4u,11u,16u,23u);
uvec4 rot48_63 = uvec4(6u,10u,15u,21u);
uvec4 digest = initDigest();
uvec4 tD;
uvec4 fTmp;
unsigned int i = 0u;
unsigned int idx;
unsigned int r;
unsigned int trig; const unsigned int MAXFT = 4294967295; //2^32-1
//What follows is the unrolled loop from 0 through 63
//0
tD = digest;
unsigned int temp;
for(;i<16u;i++)
{
fTmp = F0_15(tD.yzw);
idx = i;
r = rot0_15.x;
rot0_15 = rot0_15.yzwx;
trig = truncate(abs(sin(float(i+1)))*float(MAXFT));
tD.x = tD.y + ((tD.x+fTmp+data[int(idx)]+trig) << r);
tD = tD.yzwx;
digest +=tD;
}
for(;i<32u;i++)
{
fTmp = F16_31(tD.yzw);
idx = (5u*i + 1u) % 16u;
r = rot16_31.x;
rot16_31 = rot16_31.yzwx;
trig = truncate(abs(sin(float(i+1)))*float(MAXFT));
tD.x = tD.y + ((tD.x+fTmp+data[int(idx)]+trig) << r);
tD = tD.yzwx;
digest +=tD;
}
for(;i<48u;i++)
{
fTmp = F32_47(tD.yzw);
idx = (3u*i + 5u) % 16u;
r = rot32_47.x;
rot32_47 = rot32_47.yzwx;
trig = truncate(abs(sin(float(i+1)))*float(MAXFT));
tD.x = tD.y + ((tD.x+fTmp+data[int(idx)]+trig) << r);
tD = tD.yzwx;
digest +=tD;
}
for(;i<64u;i++)
{
fTmp = F48_63(tD.yzw);
idx = (7u*i) % 16u;
r = rot48_63.x;
rot48_63 = rot48_63.yzwx;
trig = truncate(abs(sin(float(i+1)))*float(MAXFT));
tD.x = tD.y + ((tD.x+fTmp+data[int(idx)]+trig) << r);
tD = tD.yzwx;
digest +=tD;
}
return digest;
}
